{"product_id":"outboard-paint-spray-primer-1k-light-grey-marine-primer-aerosol","title":"Outboard Paint Spray Primer – 1K Light Grey Marine Primer Aerosol","description":"\u003ch3\u003eProfessional Surface Preparation for Outboard Paint Repairs\u003c\/h3\u003e\n\u003cp\u003eThe 1K Light Grey Outboard Paint Spray Primer is designed to properly prepare surfaces before applying color coats on outboard motors and marine equipment. This professional-grade primer improves paint adhesion while helping create a smooth, uniform base for the final color coat.\u003c\/p\u003e\n\u003cp\u003eUsing primer is essential when repairing scratches, chips, or areas where bare metal, plastic, or fiberglass is exposed. It ensures the paint bonds correctly to the surface and helps prevent peeling, uneven coverage, or premature paint failure.\u003c\/p\u003e\n\u003cp\u003eThe aerosol spray format allows for easy application and even coverage across small repair areas or larger refinishing projects.\u003c\/p\u003e\n\u003ch4\u003eIdeal For\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOutboard motor paint repairs\u003c\/li\u003e\n\u003cli\u003eEngine cowling restoration\u003c\/li\u003e\n\u003cli\u003eMarine bracket repainting\u003c\/li\u003e\n\u003cli\u003eSurface preparation before color coats\u003c\/li\u003e\n\u003cli\u003eRepairing areas with exposed metal, fiberglass, or plastic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eKey Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional 1K light grey primer\u003c\/li\u003e\n\u003cli\u003eImproves paint adhesion\u003c\/li\u003e\n\u003cli\u003eHelps fill small surface imperfections\u003c\/li\u003e\n\u003cli\u003eProvides smooth base for topcoat\u003c\/li\u003e\n\u003cli\u003eAerosol spray for easy application\u003c\/li\u003e\n\u003cli\u003eCompatible with most marine paints and topcoats\u003c\/li\u003e\n\u003cli\u003eCompatible Surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eThis primer can be applied to properly prepared:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMetal\u003c\/li\u003e\n\u003cli\u003eAluminum\u003c\/li\u003e\n\u003cli\u003ePlastic\u003c\/li\u003e\n\u003cli\u003eFiberglass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCommon applications include outboard engine cowling, brackets, lower unit components, and marine hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eSurface Preparation\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProper surface preparation is essential for achieving the best paint results.\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eWash the repair area with soap and water and rinse thoroughly.\u003c\/li\u003e\n\u003cli\u003eClean the surface using a wax and grease remover to remove contaminants such as oil, grease, or wax.\u003c\/li\u003e\n\u003cli\u003eAllow the surface to dry completely.\u003c\/li\u003e\n\u003cli\u003eSand the repair area using 400–600 grit sandpaper until the surface is smooth and the existing gloss has been removed.\u003c\/li\u003e\n\u003cli\u003eRemove sanding dust using compressed air or a clean cloth.\u003c\/li\u003e\n\u003cli\u003eWipe the surface again using wax and grease remover before applying primer.\u003c\/li\u003e\n\u003cli\u003ePrimer Application Instructions\u003c\/li\u003e\n\u003cli\u003eShake the aerosol can thoroughly before use.\u003c\/li\u003e\n\u003cli\u003eSpray a light, even coat over the repair area while holding the can approximately 6–10 inches from the surface.\u003c\/li\u003e\n\u003cli\u003eAllow 5–10 minutes drying time between coats.\u003c\/li\u003e\n\u003cli\u003eApply additional light coats if needed for full coverage.\u003c\/li\u003e\n\u003cli\u003eOnce primer is fully dry, lightly sand with 1000–1500 grit sandpaper if necessary to smooth imperfections.\u003c\/li\u003e\n\u003cli\u003eThe surface is then ready for the final color coat and clearcoat application.\u003c\/li\u003e\n\u003cli\u003eAchieve a Professional Paint Finish\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eUsing a proper primer layer ensures the final paint adheres correctly and produces a smooth, long-lasting finish. This 1K Light Grey marine primer provides the ideal base layer for restoring and refinishing outboard motors and marine components.\u003c\/p\u003e","brand":"ColorRite","offers":[{"title":"Default Title","offer_id":52105139388697,"sku":"MAPRI","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/7491\/0489\/files\/COLORRITESPRAYPRIMER.png?v=1773435073","url":"https:\/\/boatmaxonline.com\/products\/outboard-paint-spray-primer-1k-light-grey-marine-primer-aerosol","provider":"Boat Max Online","version":"1.0","type":"link"}