SKU: 5547-S

Yamaha Outboard Paint Spray – Dark Blueish Gray Metallic #2 Aerosol

$4000 USD

Shipping & Delivery Times

Delivery time depends on the stock status shown on the product page:

In Stock (green indicator) — Your order ships from our warehouse and arrives within 2–7 business days, depending on your location.

Ships in 2–4 Days (orange indicator) — This item isn't currently in our warehouse. We place the order with our supplier right away, and once we receive it, it ships to you and arrives within 2–7 business days.

Please note: Delivery times to Alaska, Hawaii, and other remote locations may be longer, and additional shipping surcharges apply.

For more Detail - Click Here

Bring your engine back to its original appearance with Dark Blueish Gray Metallic #2 factory-matched aerosol spray paint designed for Yamaha outboard motors. This professional-grade marine paint allows you to repair scratches, chips, oxidation, and faded surfaces while maintaining the clean factory look of your engine.

The aerosol format makes it easy to apply smooth, even coats across larger areas such as engine cowling, brackets, and other painted components.

This paint is ideal for outboard restoration, cosmetic repairs, and routine maintenance.

Factory-Matched Dark Blueish Gray

This paint is formulated to match the Dark Blueish gray factory color used on many Yamaha outboard motors, ensuring repairs blend naturally with the original finish.

Suitable for use on:
  • Outboard engine cowling
  • Mounting brackets
  • Lower unit components
  • Painted metal, fiberglass, and plastic surfaces
Ideal For
  • Repairing paint scratches and chips
  • Restoring faded engine cowling
  • Outboard motor refinishing
  • Cosmetic engine restoration
  • Marine maintenance and touch-ups

Surface Preparation

  1. Proper surface preparation is critical for achieving a professional finish.
  2. Wash the area to be painted using soap and water. Rinse thoroughly.
  3. Clean the surface using a wax and grease remover with a clean lint-free cloth. Wipe in one direction only.
  4. Rinse with water and allow the surface to dry completely.
  5. Sand the repair area using 400–600 grit sandpaper until the surface is smooth and the gloss from the existing paint is removed.
  6. Remove sanding dust by blowing or wiping the area clean.
  7. Clean the area again using wax and grease remover.
  8. If the repair area exposes bare metal or plastic, apply primer before painting according to primer instructions.

Aerosol Painting Instructions

1. Perform a Test Panel

Always spray a test panel before beginning your repair. This allows you to verify:

  • color accuracy
  • coverage
  • dry time

Compare the test panel in direct sunlight to ensure a proper color match before proceeding.

2. Apply Base Color
  • Apply light, even coats of paint.
  • Apply the first wet coat evenly across the repair area.
  • Allow 5–10 minutes of drying time.
  • Apply a second coat in the same manner.
  • Inspect coverage and apply additional coats if necessary.
  • Allow the paint to dry for 30–60 minutes before applying clearcoat.
3. Apply Clearcoat
  • Once the color coat has dried:
  • Apply one even coat of clearcoat to the painted area.
  • Allow 5–10 minutes drying time.
  • Apply a second wet coat for proper gloss and protection.
Follow clearcoat instructions for best results.
Important Application Tips
  1. Always perform a test spray panel before painting.
  2. Do not sand between color coats or before applying clearcoat.
  3. ColorRite paints are designed for plastic, metal, and fiberglass surfaces.
  4. No flex additive is required.
  5. After the paint has cured for approximately 5 days, the surface can be: wet sanded, polished, waxed, buffed

If the finish appears dull after clearcoat dries, polishing compound can be used to restore gloss.
Back to top